Janome Convertible Free-Motion Foot Set for HD-9

$149.00 $170.00
Janome Convertible Free-Motion Foot Set
for high-speed semi-industrial series models
Part Number: 767 433 004
If you are looking to start free darning on the Janome industrial range, this Convertible Free Motion Foot Set has everything you need; and includes foot holder, open toe and closed toe feet, and a screw on darning plate.
This Foot and Needle Plate Set fits the following sewing machine models:
Janome: 1600P, HD-9
| Weight | 0.1 kg |
|---|
Based on 0 reviews
Be the first to review “Janome Convertible Free-Motion Foot Set for HD-9” Cancel reply
You must be logged in to post a review.
Related products
-
For 5mm Machines, For 7mm Machines, Presser Feet
Janome Concealed Zipper Foot
0 out of 5(0)Good quality ready to wear garments will often have an invisible zip fitted. These zippers are often neglected by the home dressmaker, which is a pity because with the Concealed Zipper Foot, they can ensure success every time. Invisible zips are suitable for all fabrics from fine silk jersey through to suit weight wools and tweeds. The key is to get the needle as close to the fastener as possible, which this foot accomplishes by slightly unrolling the zipper just before the needle. Once fitted, a well sewn invisible zipper will merely look like part of the seam.
SKU: 200 333 001 -
For 7mm Machines, Presser Feet
Janome Open Toe Darning Foot (High Shank)
0 out of 5(0)With a Darning Foot, you are able to let your creativity be the guide and produce beautiful “freehand” embroidery designs. With its spring action, this foot holds the fabric down with the needle enters the material thereby minimizing skipped and puckered stitches.
SKU: 200 337 005 -
For 7mm Machines, Presser Feet
Janome 7mm Ditch Quilting Foot – Stitch in the Ditch Foot
0 out of 5(0)The Janome 7mm Ditch Quilting foot features a centre guide bar that allows you to precisely stitch along the centre seam (the “ditch”). Perfect for quilting, patchwork and top stitching.
This Janome Stitch in the Ditch foot will fit all 7mm Janome and Elna sewing machines (See Below)
SKU: 200 341 002 -
For 7mm Machines, Presser Feet
Janome Closed Toe Darning Foot (Low Shank)
0 out of 5(0)Part Number:Â 200 349 000
Sometimes referred to as the embroidery foot or free motion foot, the darning foot is used for ’free hand’ embroidery and darning to ensure proper stitch formation, minimise skipped stitches and puckering and also protect your fingers while you move your fabric freely under the needle. Especially beneficial to those just learning how to do free hand embroidery.
SKU: 200 349 000







There are no reviews yet.