Janome Overlocker Cording Foot Type B
Out of stock
or 4 payments of $9.75 with Wizit learn more
Create a full looking edge on your overlocker with the Janome Cording Foot (B). Capable of working with thicker cords and piping, this foot uses its guide to perfectly deliver the cord so that it can be overlocked over with a rolled hem.Â
$39.00 $50.00
Out of stock
Janome Cording Foot (B)
Overlocker Foot
Part Number: 200 208 109
Create a full looking edge on your overlocker with the Janome Cording Foot (B). Capable of working with thicker cords and piping, this foot uses its guide to perfectly deliver the cord so that it can be overlocked over with a rolled hem.Â
This Janome Cording Foot B fits the following overlockers:
Janome: 1110DX, 204D, 434DR, 544D, 634D, 644D, 7034D, 734D, 744D, 9002D, 9102D, HF3434D, HF504D, HF9102D, HF7933, 8002D, 8002DX, 8004D, AT2000D (Air Threader)
Elna:Â 792D, 664, 664Pro, Elina Pro
Weight | 0.027 kg |
---|
Related products
-
For 5mm Machines, For 7mm Machines, Presser Feet
Janome Concealed Zipper Foot
0 out of 5(0)Good quality ready to wear garments will often have an invisible zip fitted. These zippers are often neglected by the home dressmaker, which is a pity because with the Concealed Zipper Foot, they can ensure success every time. Invisible zips are suitable for all fabrics from fine silk jersey through to suit weight wools and tweeds. The key is to get the needle as close to the fastener as possible, which this foot accomplishes by slightly unrolling the zipper just before the needle. Once fitted, a well sewn invisible zipper will merely look like part of the seam.
SKU: 200 333 001 -
For 7mm Machines, Presser Feet
Janome Closed Toe Darning Foot (Low Shank)
0 out of 5(0)Part Number:Â 200 349 000
Sometimes referred to as the embroidery foot or free motion foot, the darning foot is used for ’free hand’ embroidery and darning to ensure proper stitch formation, minimise skipped stitches and puckering and also protect your fingers while you move your fabric freely under the needle. Especially beneficial to those just learning how to do free hand embroidery.
SKU: 200 349 000 -
For 7mm Machines, Presser Feet
Janome Darning Foot (High Shank)
0 out of 5(0)With a Darning Foot, you are able to let your creativity be the guide and produce beautiful “freehand” embroidery designs. With its spring action, this foot holds the fabric down with the needle enters the material thereby minimizing skipped and puckered stitches.
SKU: 200 325 000 -
For 7mm Machines, Presser Feet
Janome Hemmer Foot Set (4mm & 6mm) – for Rolled Hems
0 out of 5(0)The Janome Hemmer Feet are used to create narrow rolled hems (similar to those found on shirt tails, frills, and linens. Commonly known as a Rolled Hemmer, the hemmer foot features a scroll shaped feeder on top and a straight groove on the underside which determines the width of the finished hem. The 4 mm/6 mm set will allow for the use of heavier fabrics.
SKU: 200 326 001